Timing belt Optibelt 50 AT10 / 8800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT10 / 8800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT10 / 8800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 50 AT10 / 8800 AFX. It has an AT10 profile, an 8800 mm length and a 10 mm pitch. Use these three values to match it against the belt you are replacing.
To confirm the match, read the marking on the back of the old belt and compare it with the code above. The profile must be AT10, the length must be 8800 mm and the pitch must be 10 mm. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to verify the profile and pitch before ordering.
When you send your quote request by WhatsApp or email, include the part number 50 AT10 / 8800 AFX and the quantity. A photo of the belt marking and the drive arrangement helps us confirm the correct item. If you need a second opinion on the profile or length, our team can review the details with you.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 8800mm
Frequently asked questions
- How do I match this Optibelt timing belt to the one I am replacing?
- Compare the code on the back of the old belt with 50 AT10 / 8800 AFX. The profile must be AT10, the length must be 8800 mm and the pitch must be 10 mm. If the marking is gone, measure the length and check the tooth profile.
- What information should I send for a quote?
- Send the part number 50 AT10 / 8800 AFX, the quantity you need, and a photo of the old belt marking if you have one. We reply by WhatsApp or email.
- Can you help if I am not sure the profile is AT10?
- Yes. Send the belt code, the length and a photo of the drive. We can review the AT10 profile and 10 mm pitch against your application.