Timing belt Optibelt 50 AT10 / 1300 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT10 / 1300 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT10 / 1300 AFX and any equivalents.
The Optibelt 50 AT10 / 1300 AFX is an Alpha Flex timing belt with an AT10 profile, a 1300 mm length and a 10 mm pitch. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check the sheaves for worn grooves, burrs, corrosion or embedded debris that can cut into the belt teeth. Confirm the shafts turn freely, the bearings are sound and the sheave alignment is correct. Any misalignment or runout will shorten belt life regardless of the belt you install.
Verify the belt path and tensioning arrangement, then confirm the part marking on the old belt matches the 50 AT10 / 1300 AFX. If the drive has more than one belt, replace the full set so loads stay even. After fitting, recheck tension and alignment before returning the drive to service.
We carry the Optibelt Alpha Flex 50 AT10 / 1300 AFX for maintenance, engineering and purchasing teams. Send the part number and the quantity you need by WhatsApp or email, and we will reply promptly to confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 1300mm
Frequently asked questions
- How do I confirm the 50 AT10 / 1300 AFX is the correct belt?
- Read the marking on the back of the old belt and compare it with the profile, length and pitch of this belt: AT10, 1300 mm and 10 mm. If the marking is worn, send us the drive details and we will help confirm.
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, burrs and debris, check shaft bearings and alignment, and confirm the belt path and tensioner operate correctly. Correct any issues before fitting the new belt.
- Can I request a quote for the 50 AT10 / 1300 AFX?
- Yes. Send the part number and the quantity you need by WhatsApp or email. We will reply promptly to confirm the belt or suggest an equivalent.