Timing belt Optibelt 50 AT10 / 10200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT10 / 10200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT10 / 10200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 50 AT10 / 10200 AFX. It uses the AT10 profile with a 10 mm pitch and a 10200 mm length. For drives that rely on synchronous power transmission, confirming the profile and length against the old belt is the first step.
Timing belts in this class are common on industrial drives where shaft synchronization matters and where a long center distance is part of the layout. The AT10 profile and 10 mm pitch define how the belt mates with the pulleys, while the 10200 mm length sets the belt path. Before ordering, read the marking on the back of the existing belt and compare it with the profile and length shown here.
If the marking is worn or unreadable, measure the old belt and note the tooth profile and pitch, then match those to the AT10 and 10 mm values. Send the part number 50 AT10 / 10200 AFX, or your measurements and photos of the belt and pulleys, by WhatsApp or email. The team can confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 10200mm
Frequently asked questions
- How do I confirm this Optibelt belt fits my drive?
- Check the marking on the back of the old belt against the profile AT10, pitch 10 mm and length 10200 mm. If the marking is gone, measure the belt and compare the tooth profile and pitch to these values.
- What information should I send for a quote?
- Send the part number 50 AT10 / 10200 AFX, or the profile, pitch and length from your old belt. Photos of the belt and pulleys help confirm the match.
- Can you help if I only have the old belt and no part number?
- Yes. Send clear photos of the belt, including any visible marking, and the pulley dimensions. The team will use the AT10 profile and 10 mm pitch to identify the correct belt or an equivalent.