Timing belt Optibelt 50 / 8M 8800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 / 8M 8800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 / 8M 8800 AFX and any equivalents.
The Optibelt 50 / 8M 8800 AFX is an Alpha Flex timing belt with an HTD 8M profile and an 8800 mm length. When you need to replace a belt on a driven system, start by reading the marking on the back of the old belt. That marking confirms the profile and length you need to match.
A worn or damaged belt often carries a marking that has become difficult to read. Clean the back of the belt and look for the part number, profile and length. If the original marking is gone, measure the belt width and count the teeth, then note the pitch. The 50 / 8M 8800 AFX uses an 8 mm pitch and an 8800 mm length, so those values are what you compare against the old belt.
The HTD 8M profile is a synchronous belt profile. This belt is built for drives that require tooth engagement rather than friction. Confirm that the sprockets on your drive match the 8 mm pitch and that the belt width fits the pulley face. If the old belt is still intact, lay it flat and check that the tooth profile and spacing match the replacement.
Once you have the marking or measurements, send the part number to MR Industrial Accessories. We carry the Optibelt 50 / 8M 8800 AFX and can help confirm it is the correct belt for your drive. If you need assistance reading a worn marking, send a photo of the belt back and the drive arrangement.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 8800mm
Frequently asked questions
- How do I read the marking on my old timing belt?
- Look for a printed or molded code on the back of the belt. It typically includes the profile, pitch and length. For this belt, the marking would show 50 / 8M 8800 AFX, which indicates an HTD 8M profile with an 8800 mm length. If the marking is unreadable, measure the pitch and length instead.
- What should I send to get a quote for this belt?
- Send the full part number, 50 / 8M 8800 AFX, along with the quantity you need. If you are unsure about the part number, include the belt marking or your measurements. Our team will confirm the belt and reply by WhatsApp or email.
- Can I use this belt if my old belt has a different marking?
- The 50 / 8M 8800 AFX is an HTD 8M profile belt with an 8800 mm length. If your old belt has a different profile or length, it will not be a direct replacement. Send us the old marking and we can help you identify the correct belt.