Timing belt Optibelt 50 / 8M 7200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 / 8M 7200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 / 8M 7200 AFX and any equivalents.
The Optibelt 50 / 8M 7200 AFX is an Alpha Flex timing belt with an HTD 8M profile, a 7200 mm length and an 8 mm pitch. It is the belt to reference when you are replacing a worn or damaged synchronous belt on a driven system and need the same profile and length.
To match it to the belt being replaced, read the marking on the back of the old belt and compare the profile and length. The replacement must carry the HTD 8M profile and the 7200 mm length shown here. If the old belt is unmarked or the print has worn off, measure the profile and the length and send those figures with your request.
The 50 / 8M 7200 AFX is supplied by Optibelt as part of the Alpha Flex series. The HTD 8M profile and 8 mm pitch define how the belt seats in the pulleys, while the 7200 mm length sets the center distance of the drive. A belt that differs in either dimension will not run correctly.
When you request a quote, send the part number 50 / 8M 7200 AFX, the profile HTD 8M, the length 7200 mm and the pitch 8 mm. If you are also replacing the pulleys or need help confirming the right belt, include the drive details and the team can check the match or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 7200mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the profile and length. This belt is HTD 8M profile with a 7200 mm length and 8 mm pitch. If the old belt is unreadable, measure the profile and length and send those figures with your quote request.
- What details should I send with my quote request?
- Send the part number 50 / 8M 7200 AFX, the profile HTD 8M, the length 7200 mm and the pitch 8 mm. If you have the old belt, include any marking from the back. The team can confirm the match or suggest an equivalent.
- Can you help if I am not sure of the profile?
- Yes. Send the part number from the old belt, or the profile and length you measured. The team will check the details against the 50 / 8M 7200 AFX and reply by WhatsApp or email.