Timing belt Optibelt 50 / 8M 6600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 / 8M 6600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 / 8M 6600 AFX and any equivalents.
The Optibelt 50 / 8M 6600 AFX is an Alpha Flex timing belt with an HTD 8M profile, a 6600 mm length and an 8 mm pitch. Before you fit it, inspect the drive and sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or debris, and confirm the teeth are clean and undamaged. Verify alignment between the pulleys and check that the shafts and bearings turn freely. Confirm the tensioning device moves through its full range and that the frame or guard does not rub the belt path.
Match the old belt to the Optibelt 50 / 8M 6600 AFX by reading the marking on its back and comparing the profile and length. The HTD 8M profile and 6600 mm length with an 8 mm pitch identify this belt. If the old marking is worn or unreadable, measure the length and count the teeth, then send the part number for confirmation.
For a quote, send the part number 50 / 8M 6600 AFX, the quantity and the drive details by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent. We carry Optibelt Alpha Flex timing belts for maintenance, engineering and purchasing teams.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 6600mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, burrs or debris, confirm pulley alignment, check that shafts and bearings turn freely, and make sure the tensioner moves through its full range without interference.
- How do I confirm the Optibelt 50 / 8M 6600 AFX matches the belt I am replacing?
- Read the marking on the back of the old belt and compare the profile and length. This belt has an HTD 8M profile, a 6600 mm length and an 8 mm pitch. If the marking is unreadable, measure the length and count the teeth, then send the part number for confirmation.
- What do I need to send for a quote?
- Send the part number 50 / 8M 6600 AFX, the quantity and the drive details by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.