Timing belt Optibelt 50 / 8M 5400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 / 8M 5400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 / 8M 5400 AFX and any equivalents.
The Optibelt 50 / 8M 5400 AFX is an Alpha Flex timing belt with an HTD 8M profile, a 5400 mm length and an 8 mm pitch. We carry it for drives where a synchronous belt must match the original specification exactly. The marking on the back of the old belt is the fastest way to identify it.
Read the back of the belt before ordering. You are looking for the profile and the length: HTD 8M and 5400 mm. The 50 in the part number is the belt width as Optibelt marks it, so copy the full marking rather than only the length. If the printing is worn, measure the belt and count the teeth to confirm the profile and pitch.
The 8 mm pitch and 5400 mm length must match the drive. A belt that is close but not identical will not sit correctly in the pulleys or hold the correct tension. Check the pulleys for worn teeth, the flanges for damage and the tensioner for free movement before fitting the new belt.
Send us the complete marking from the old belt, including the brand, profile, length and width, along with the quantity you need. Our team confirms the belt and replies with a quote by WhatsApp or email.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 5400mm
Frequently asked questions
- What does the marking on the old belt tell me?
- It gives the profile, length and width. For this belt that is HTD 8M, 5400 mm and the width shown as 50. Copy the full marking, not just the length.
- Can I order by the part number alone?
- Yes. Send the part number 50 / 8M 5400 AFX, or the full marking from the back of the belt, and we will confirm it against your drive.
- What should I check on the drive before fitting a new belt?
- Inspect the pulleys for worn or damaged teeth, check the flanges and make sure the tensioner moves freely. These affect how the new belt runs.