Timing belt Optibelt 50 / 8M 1400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 / 8M 1400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 / 8M 1400 AFX and any equivalents.
When you need to match a timing belt that is already on the drive, start with the marking on the back of the old belt. The Optibelt 50 / 8M 1400 AFX from the Alpha Flex series is an HTD 8M profile timing belt with a 1400 mm length and an 8 mm pitch. Confirm those three details against your drive before you request a quote.
The part number itself is the fastest reference. The 50 / 8M 1400 AFX code identifies an HTD 8M timing belt, 1400 mm long, with an 8 mm pitch. If the old belt is worn or the marking is unreadable, measure the length and count the teeth only if you are certain of the pitch. Otherwise, send a photo of the belt back and the drive sprockets so we can help confirm the match.
Timing belts should be replaced when inspection shows cracking, missing teeth, exposed cord, or glazing on the tooth face. Check the sprockets for worn teeth, debris in the grooves, and correct alignment. On drives with more than one belt, replace all belts at the same time so the load stays even.
We carry the Optibelt 50 / 8M 1400 AFX for maintenance and replacement work. To request a quote, send the part number by WhatsApp or email. If you are unsure of the exact code, include the belt marking, the profile, and the length in millimeters, and our team will reply promptly to confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1400mm
Frequently asked questions
- How do I confirm the Optibelt 50 / 8M 1400 AFX is the right belt for my drive?
- Check the marking on the back of the old belt and match the profile, length, and pitch. This belt is HTD 8M, 1400 mm long, with an 8 mm pitch. If the marking is not clear, send the belt details or a photo to our team for confirmation.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one timing belt, replace all belts at the same time. Mixing a new belt with worn belts can cause uneven load and poor timing.
- What information should I send with my quote request?
- Send the part number 50 / 8M 1400 AFX if you have it. If not, provide the belt marking, the profile, and the length in millimeters. A photo of the old belt and the sprockets also helps us confirm the correct replacement.