Timing belt Optibelt 50 / 5M 8800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 / 5M 8800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 / 5M 8800 AFX and any equivalents.
This page covers the Optibelt 50 / 5M 8800 AFX timing belt from the Alpha Flex series. It uses an HTD 5M profile with a 5 mm pitch and an 8800 mm length. Use these figures to match it against the belt you are replacing.
The simplest way to confirm a match is to read the marking on the back of the old belt. Look for the profile, the length and the part number. If the old belt shows HTD 5M, 8800 mm and 5 mm pitch, this Optibelt Alpha Flex belt is the same size. Compare the width and tooth count only if they are printed on the old belt, and check that the pulleys are clean and undamaged before fitting.
When the marking is worn away, measure the old belt. Lay it flat and measure the outside length, then check the tooth profile against a known HTD 5M pulley. The 5 mm pitch is the distance from one tooth center to the next. The 8800 mm length is the datum length for this belt. If those two figures match, the belt will sit correctly on the drive.
Send the part number 50 / 5M 8800 AFX, or the profile and length from the old belt, by WhatsApp or email. The team can confirm the belt or suggest an equivalent. For drives that run more than one belt, order the full set so all belts share the same profile, length and pitch.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 8800mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Read the marking on the back of the old belt. If it shows HTD 5M, 8800 mm and 5 mm pitch, this Optibelt 50 / 5M 8800 AFX belt is the same size. If the marking is gone, measure the old belt and check the tooth profile against an HTD 5M pulley.
- Can you confirm the right belt if I send the part number?
- Yes. Send the part number 50 / 5M 8800 AFX by WhatsApp or email. The team can confirm it or suggest an equivalent.
- Should I replace all belts on the drive at once?
- On drives that use more than one belt, replace the full set. Mixed belts can wear at different rates and affect how the drive runs. Order the same profile, length and pitch for every position.