Timing belt Optibelt 50 / 5M 5600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 / 5M 5600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 / 5M 5600 AFX and any equivalents.
This is an Optibelt Alpha Flex timing belt with the code 50 / 5M 5600 AFX. It is built to the HTD 5M profile with a 5 mm pitch and a 5600 mm length. We carry this belt, and you can request a quote by part number.
The two values that matter most when you are identifying this belt are the profile and the length. The profile is HTD 5M, so the teeth are shaped to that standard rather than to a different tooth form, and the pitch is 5 mm. The length is 5600 mm. Together, the profile and the length tell you whether this is the belt your drive was built around.
If you are replacing an existing belt, read the marking on the back and compare it with the code 50 / 5M 5600 AFX. A belt that matches on profile and length but differs elsewhere in the code is not the same item. Send the code you find, and we can confirm it against this Optibelt Alpha Flex belt.
If the marking is worn off or unreadable, measure the length and identify the tooth profile from the pulleys instead. Send both figures with the drive details. We can check the profile and length against this belt and help you confirm the right one before you order.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 5600mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile is HTD 5M and the pitch is 5 mm, which fixes the tooth form and spacing. The length is 5600 mm. Those two figures are what you match against your drive.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the belt and compare it with the code 50 / 5M 5600 AFX. If it matches, this is the same belt. If the marking is unreadable, measure the length and check the pulley tooth profile, then send both to us.
- What should I send to get a quote?
- Send the part number 50 / 5M 5600 AFX, the quantity you need, and the drive it goes on. If you are unsure of the number, send the belt marking or the measured length and profile instead.