V-belt Optibelt 5-SPC 5600 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5-SPC 5600 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5-SPC 5600 BP2 and any equivalents.
This is the Optibelt 5-SPC 5600 BP2, a banded V-belt from the KB Blue Power 2 series. It is the belt to specify when you are replacing an existing banded V-belt and need the same profile and length. The part number itself is the reference to match.
To match it to the belt being replaced, read the marking on the back of the old belt. You are looking for the same code: 5-SPC 5600 BP2, or at least the same series and the same length of 5600 mm. Banded V-belts are made up of multiple ribs joined into one unit, so the code identifies both the profile and the number of ribs in the band. If the old belt is worn or the marking is gone, measure the length and confirm the profile before ordering.
This belt is built for drives that use several V-belts running in parallel, where a single banded belt keeps the ribs aligned and prevents individual belts from turning over or whipping. When you replace it, inspect the sheaves for wear and make sure the grooves are clean and undamaged. If the drive runs more than one banded belt, replace them as a set so the load is shared evenly.
Send us the part number 5-SPC 5600 BP2 and the quantity you need by WhatsApp or email, and we will confirm the belt and quote it. If you are not certain of the code, send a photo of the marking on the old belt and the drive details, and we will help you identify the right one.
Dimensions
- Length
- 5600mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number 5-SPC 5600 BP2 and the quantity you need by WhatsApp or email. If you have the old belt, a photo of the back marking helps confirm the match.
- How do I know this is the right belt for my drive?
- Check the marking on the belt you are replacing. The code 5-SPC 5600 BP2 identifies the profile and length, and the length is 5600 mm. If the marking is unreadable, measure the old belt and send us the details.
- Should I replace all the belts on the drive at the same time?
- Yes. On a drive that uses more than one banded V-belt, replacing them as a set keeps the load shared evenly and helps avoid premature wear on the new belt.