Poly-V belt Optibelt 5 EPJ 316 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5 EPJ 316 CP belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5 EPJ 316 CP and any equivalents.
This Optibelt Conveyor Power belt is a Poly-V (multi-rib) belt with an EPJ profile and a 316 mm length. It is the type of compact multi-rib belt used in light conveying and small driven equipment, where a flat, flexible belt wraps small pulleys and keeps the drive narrow. Confirm fit by matching the profile and the length on the belt you are replacing.
The marking on the back of the belt is the fastest way to identify it. Read the profile and the length together: EPJ sets the rib geometry, and 316 mm is the datum length for this belt. If the old belt is worn, frayed or cut, measure it flat and compare that number with the marking before you order.
Poly-V belts of this size are commonly used on conveying equipment and similar light drives that run at moderate speed and load. Inspect the pulleys at the same time: check for worn grooves, debris in the ribs and misalignment, since any of these will shorten the life of a new belt.
If a drive uses more than one belt, replace the set together so the belts share the load evenly. Send the part number, the profile and the length, and a photo of the back marking if it is legible. We carry Optibelt and can confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- EPJ
- Length
- 316mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Match the profile and the length on the back of the belt you are replacing. This belt is EPJ profile with a 316 mm length. If the marking is unreadable, send us a photo and the equipment details and we will help confirm it.
- What should I send to get a quote?
- Send the part number 5 EPJ 316 CP, along with the profile and length if you have them. A photo of the belt marking helps us verify the match before we reply.
- Should I replace more than one belt at a time?
- If the drive runs a set of belts, replace them as a set so they wear evenly and share the load. Mixing a new belt with worn ones can cause uneven tension and shorter service life.