V-belt Optibelt 5-E 7500
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5-E 7500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5-E 7500 and any equivalents.
This Optibelt 5-E 7500 is a banded V-belt from the KB VB series, with a length of 7500 mm. The 5-E profile and 7500 mm length are the two numbers to match against your drive before you order.
On a banded V-belt, the profile sets how the belt sits in the pulley grooves and the length sets the center distance it will span. This belt is listed with a 5-E profile and a 7500 mm length, so those are the values to check first against the belt you are replacing. If your drive runs multiple V-belts as a set, a banded construction keeps the ribs tied together, which is why these are often ordered as a matched unit rather than as single belts.
The most reliable way to confirm a replacement is to read the marking on the back of the old belt. Look for the profile and the length, and compare them with 5-E and 7500 mm. If the marking is worn or the belt is missing, measure the length along the belt and check the pulley groove profile against the 5-E section. Send the part number, the profile and the length with your quote request so the team can confirm the match or point you to the right belt.
Dimensions
- Length
- 7500mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 5-E profile identifies the cross-section that fits the pulley grooves, and 7500 mm is the belt length. Both values need to match your drive for the belt to run correctly.
- How do I confirm this is the belt I need?
- Check the marking on the back of your existing belt for the profile and length, and compare them with 5-E and 7500 mm. If the marking is not readable, measure the belt length and check the pulley groove profile.
- What should I send to request a quote?
- Send the part number 5-E 7500, along with the profile and length from your old belt if you have them. If you are replacing a set, include the number of belts on the drive.