V-belt Optibelt 5-D 2500
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5-D 2500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5-D 2500 and any equivalents.
This Optibelt 5-D 2500 is a banded V-belt from the KB VB series. Banded V-belts are used on drives with multiple V-grooves where the belts must run as a single unit. The length is 2500 mm.
Banded V-belts are common on high-power drives that use several V-belts side by side, such as those found on industrial fans, compressors, and some process machinery. The band ties the individual belts together, which helps keep them aligned and prevents them from flipping or jumping out of the grooves. This makes them suitable for drives where a single V-belt would not carry the load or where vibration is a concern.
To confirm fit, check the drive's sheave grooves and the required belt profile. The 5-D profile indicates a specific cross-section, and the 2500 mm length must match the drive's center distance and pulley diameters. Also verify that the drive is designed for a banded belt, as the band adds width and requires matching groove spacing.
When ordering, provide the part number 5-D 2500 and the quantity. If you are replacing an existing belt, inspect the sheaves for wear and alignment before installing new belts. For drives with multiple belts, replace the full set at the same time to maintain even load distribution.
Dimensions
- Length
- 2500mm
Frequently asked questions
- What is a banded V-belt used for?
- Banded V-belts are used on drives with multiple V-grooves where several belts operate together as a unit. The band keeps the belts aligned and prevents individual belts from flipping or coming off the sheaves.
- How do I confirm that the 5-D 2500 fits my drive?
- Check that your drive uses a 5-D profile and that the 2500 mm length matches your current belt or the drive's requirements. Also confirm that the sheaves are designed for a banded belt and that the groove spacing matches the belt's construction.
- What information should I send for a quote?
- Send the part number 5-D 2500 and the quantity you need. If you are unsure about the profile or length, include a photo of the belt marking and the sheave dimensions so we can help confirm the correct belt.