V-belt Optibelt 5-C 3048
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5-C 3048 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5-C 3048 and any equivalents.
The Optibelt 5-C 3048 is a banded V-belt with a length of 3048 mm. It is the belt to specify when the drive runs multiple V-belts side by side and you want them held together as one unit. To confirm it is the correct replacement, match it to the belt currently on the drive.
Start by reading the marking on the back of the old belt. If it shows 5-C 3048, this is the same belt. If the marking is worn or missing, measure the outside length and compare it to the 3048 mm given here, and check that the cross section matches the 5-C profile. A banded V-belt is identified by both its profile and its length, so both need to line up.
When you replace a banded V-belt, the whole band is replaced as one piece. Inspect the sheaves for wear and make sure the grooves are clean before the new belt goes on. Check that the belt sits correctly in the grooves and that the drive is aligned. If anything on the drive has been changed, confirm the belt still matches the drive before ordering.
Send the part number 5-C 3048, or a photo of the marking on the old belt, by WhatsApp or email. If the number is unreadable, send the profile and the measured length. We carry the Optibelt 5-C 3048 and can help confirm it is the right belt for your drive.
Dimensions
- Length
- 3048mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Read the marking on the back of the belt you are replacing. If it reads 5-C 3048, it is the same belt. If the marking is gone, measure the length and check the profile against the 3048 mm and 5-C data shown here.
- What information should I send for a quote?
- Send the part number 5-C 3048. If you are not sure of the number, send the profile and the measured length, or a clear photo of the marking on the old belt.
- Can you help if the old belt marking is unreadable?
- Yes. Send what you can read, or the measured length and profile. We can help confirm the right belt or suggest an equivalent.