V-belt Optibelt 5-5V 2800 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5-5V 2800 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5-5V 2800 BP2 and any equivalents.
The Optibelt 5-5V 2800 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 7112 mm. When you need to replace a belt on a driven machine, matching the existing part number is the most reliable starting point. This page helps you confirm that the belt you remove is the same as the one you order.
Before ordering, read the marking on the back of the belt you are replacing. The code should read 5-5V 2800 BP2, and the length should correspond to 7112 mm. If the old belt is worn or dirty, clean the back so the characters are legible. A photo of the marking, along with the machine or drive details, is often enough for our team to confirm the correct replacement.
Because this is a banded V-belt, it consists of multiple V-belts joined by a common backing. That construction keeps the ribs aligned and is used where a single belt would tend to turn over or vibrate. When you remove the old belt, check the sheave grooves for wear and make sure the new belt seats correctly. If the drive uses more than one belt, replacing the full set at the same time helps maintain even tension and load sharing.
To request a quote, send the part number 5-5V 2800 BP2 by WhatsApp or email. If you are unsure whether this is the right belt, include the old belt's marking and the drive arrangement. Our team will review the details and reply promptly, and can help confirm the correct belt or suggest an equivalent where one exists.
Dimensions
- Length
- 7112mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Check the marking on the back of your existing belt. It should show 5-5V 2800 BP2. If the marking is worn, measure the length and compare it to 7112 mm, and send us a photo of the old belt for confirmation.
- Can you help if my current belt has a different number?
- Yes. Send the part number from your old belt, along with the machine and drive details. We will review it and help you find the correct Optibelt belt or a suitable equivalent.
- What information should I include with my quote request?
- Provide the part number 5-5V 2800 BP2, the quantity you need, and any details about the drive or application. If you have the old belt, include its marking and a photo if possible.