V-belt Optibelt 5-5V 2240 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5-5V 2240 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5-5V 2240 BP2 and any equivalents.
The Optibelt 5-5V 2240 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 5690 mm. When you are replacing a belt on a multi-groove drive, matching the part number and the length on the old belt is the first step. This page gives you the details to confirm the replacement.
A banded V-belt ties two or more V-belts together with a top cover, so the set runs as one unit. The 5-5V 2240 BP2 is built in that format. Before you order, read the marking on the back of the belt you are removing. You are looking for the same code: 5-5V 2240 BP2. If the old belt is worn or the marking is gone, measure the length and check the profile against the groove of the pulley. The length on this belt is 5690 mm, and the profile is 5-5V.
On a banded belt, all ribs wear together. If one rib fails, the whole band must come off. That is why replacement is done as a complete belt, not by swapping single ribs. Check the pulleys for wear, alignment and debris while the belt is off. A worn groove or a misaligned sheave will shorten the life of any new belt, no matter the brand.
If you are unsure whether this is the correct belt for your drive, send the part number, the application and a photo of the marking to our team. We carry Optibelt and can help confirm the right belt or suggest an equivalent. Quotes are handled by WhatsApp or email, and we reply promptly.
Dimensions
- Length
- 5690mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Find the marking on the back of the belt you are replacing. If it reads 5-5V 2240 BP2, this is the same belt. If the marking is unreadable, measure the length and check the profile against the pulley groove.
- Can I replace just one rib of a banded belt?
- No. A banded V-belt is made as a single unit with the ribs joined by a top cover. Replace the complete belt.
- What information should I send for a quote?
- Send the part number 5-5V 2240 BP2, the drive application and a photo of the old belt marking if you have one. We will confirm the belt or suggest an equivalent.