Timing belt Optibelt 470 H 100
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- ZR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 470 H 100 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 470 H 100 and any equivalents.
The Optibelt 470 H 100 is a timing belt in the ZR series with an H profile and a 1193.8 mm length. It is used in synchronous drives where the belt teeth mesh with pulley grooves to keep the driven shaft in step with the driver. Confirm the profile and length against the belt you are replacing before you order.
Timing belts of this type are found on industrial equipment where shaft synchronization matters, such as cam drives, positioning axes, and other positive-drive arrangements. The H profile and 1193.8 mm length are the two dimensions to check first. If the old belt is worn or the marking is unreadable, measure the length and compare the tooth profile to the pulley grooves.
When you request a quote, send the part number 470 H 100, the Optibelt brand, and the ZR series, along with the profile and length if you have them. A photo of the belt back and of the pulley teeth helps confirm the match. If the belt has been running in a set, note how many belts the drive uses so the replacement set is correct.
Dimensions
- Profile
- H
- Length
- 1193.8mm
Frequently asked questions
- How do I confirm the 470 H 100 fits my drive?
- Check that the belt profile is H and that the length is 1193.8 mm. Compare these to the marking on the belt you are replacing and to the pulley grooves. If the marking is gone, measure the length and check the tooth shape against the pulley.
- What information should I send with my quote request?
- Send the part number 470 H 100, the brand Optibelt, and the ZR series. Include the profile H and length 1193.8 mm, plus a photo of the belt and pulleys if you have one. This helps confirm the correct belt.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, replacing them as a set keeps the load shared evenly. Check how many belts your drive uses and include that in your request so the set is quoted correctly.