Timing belt Optibelt 459 3MHP 6
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 459 3MHP 6 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 459 3MHP 6 and any equivalents.
The Optibelt 459 3MHP 6 is a timing belt from the Omega HP series with an HTD 3M profile and a 459 mm length. Before you install it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check the sheaves for worn grooves, burrs, or debris that can damage the belt teeth. Confirm the shafts turn freely and that the pulleys are aligned. A clean, aligned drive helps the timing belt seat correctly and keeps the tooth profile engaged across the full width.
Verify that the belt marking matches the part number 459 3MHP 6 and that the profile is HTD 3M. The 459 mm length and 3 mm pitch identify the belt, so compare these values with the old belt before fitting. If the old belt is worn or the marking is unreadable, send the part number for confirmation.
For a quote, send the part number 459 3MHP 6, the profile HTD 3M, and the length 459 mm. If you are replacing more than one belt on the same drive, include the quantity and any other belt numbers so we can help you match the set.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 459mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, burrs, or debris, and confirm the shafts turn freely. Check that the pulleys are aligned so the belt runs true and the teeth engage evenly.
- How do I confirm the 459 3MHP 6 is the right belt?
- Compare the profile HTD 3M, the length 459 mm, and the pitch 3 mm with the old belt. The part number 459 3MHP 6 should also match the marking on the back of the belt.
- What information do you need to quote this belt?
- Send the part number 459 3MHP 6, the profile HTD 3M, and the length 459 mm. If you need more than one, include the quantity and any other belt numbers for the same drive.