Timing belt Optibelt 4400 8MDC 62
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Delta Chain
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 4400 8MDC 62 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 4400 8MDC 62 and any equivalents.
This Optibelt Delta Chain belt is a polyurethane timing belt with an 8MDC profile and a 4400 mm length. The profile and length are the two numbers to match first when you are selecting a replacement or specifying a new drive.
The 8MDC profile identifies the tooth geometry and pitch of this Delta Chain belt, while 4400 mm is the datum length. Both values are marked on the belt and should be checked against the drive documentation before you order. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to confirm the profile.
Delta Chain construction uses a polyurethane body, which is common in timing belt drives where oil resistance and low stretch matter. This belt is a synchronous belt, so it transmits motion by tooth engagement rather than friction. It is not a V-belt, narrow V-belt, cogged belt, Poly-V, double-V, banded, variable speed or CVT belt.
To request a quote, send the part number 4400 8MDC 62, the profile 8MDC and the length 4400 mm by WhatsApp or email. If you are replacing a belt on an existing drive, include the drive make and model and the width if it is known. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 4400mm
Frequently asked questions
- What do the profile and length tell me about this Optibelt belt?
- The 8MDC profile defines the tooth shape and pitch, and 4400 mm is the length. Together they determine whether the belt will fit the pulleys and maintain the correct center distance on your drive.
- How do I confirm this is the right replacement belt?
- Check the marking on the back of the old belt for the profile and length. If it reads 8MDC and 4400 mm, this Optibelt Delta Chain belt matches those two values. If the marking is missing, measure the length and count the pulley teeth to verify.
- What should I send to get a quote for this belt?
- Send the part number 4400 8MDC 62, or the profile 8MDC and length 4400 mm, by WhatsApp or email. If you have the drive details, include the equipment make and model and the belt width to help confirm the selection.