Timing belt Optibelt 4326 D14M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 4326 D14M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 4326 D14M and any equivalents.
This Optibelt Omega High Power belt is a double-sided timing belt with a 4326 mm length. The part number 4326 D14M identifies it on the shelf and in the drive documentation, so you can match the old belt directly.
The profile and the length are the two figures that drive selection here. The D14M profile sets the tooth form and pitch, while the 4326 mm length sets the run. Read both from the marking on the back of the belt you are replacing, or from the drive drawing, and compare them with this listing before you order.
A double-sided timing belt drives from both faces, so it is used where two shafts must turn from one belt run. When you pull the belt, inspect both tooth faces for wear, cracking or missing teeth, and check the pulleys for worn grooves or debris. If the drive runs more than one belt, replace the set together so the load stays even.
To request a quote, send the part number 4326 D14M, the quantity you need, and the profile and length as marked on the belt. If the marking is worn or unreadable, send a photo of the belt and the drive. Our team replies by WhatsApp or email and can confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 4326mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The D14M profile defines the tooth form and pitch of the belt, and 4326 mm is its length. Both must match the drive before you replace the belt.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the old belt and compare the profile and length with this listing. If the marking is gone, send a photo of the belt and the drive for confirmation.
- What should I send with my quote request?
- Send the part number 4326 D14M, the quantity, and the profile and length from the belt or drive drawing. A photo helps if the marking is worn.