V-belt Optibelt 41X13 1940
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Vario Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 41X13 1940 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 41X13 1940 and any equivalents.
The Optibelt Vario Power 41X13 1940 is a variable speed belt with a length of 1940 mm. It is used in drives where the belt runs at varying diameters and speeds. This page covers how to match it to the belt you are replacing.
The most reliable way to match a variable speed belt is to read the marking on the back of the old belt. Compare the profile and the length to the 41X13 1940. The profile is 41X13 and the length is 1940 mm. If the marking is worn or unreadable, measure the outside length and check the profile against the pulley groove before ordering.
A variable speed belt wears differently from a standard V-belt because it runs on the flanks and shifts position in the sheaves. Check the sheave faces for grooves, steps or wear and confirm the belt sits at the correct height in the pulley. If the drive uses more than one belt, replace the set together so the belts share the load evenly.
Send the part number 41X13 1940 by WhatsApp or email to request a quote. If you are unsure of the profile or length, send a photo of the belt marking and the pulley dimensions. Our team can confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1940mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the profile 41X13 and the length 1940 mm. Also compare the belt to the pulley groove to confirm the profile.
- Can I replace just one belt in a multi-belt drive?
- It is good practice to replace all belts in a set at the same time. Belts that have run together wear together, and mixing old and new belts can cause uneven loading.
- What should I send to get a quote?
- Send the part number 41X13 1940 by WhatsApp or email. If you need help confirming the belt, include a photo of the old belt marking and the pulley dimensions.