Timing belt Optibelt 405 5MHP 25
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 405 5MHP 25 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 405 5MHP 25 and any equivalents.
This Optibelt Omega HP timing belt is identified by the code 405 5MHP 25. It uses the HTD 5M profile with a 405 mm length and a 5 mm pitch. Use these three values to confirm the belt matches your drive before you request a quote.
Timing belts in the HTD 5M profile are common on drives where the belt teeth mesh with matching pulleys to keep the shafts synchronized. To confirm fit, check that your old belt is marked with the same profile and length, and that the pulley grooves match the HTD 5M tooth shape. The 405 mm length and 5 mm pitch must match what your drive requires.
If you are replacing a belt, read the marking on the back of the old belt and compare it with 405 5MHP 25. When a drive uses more than one belt, replace the set together so the load stays even. Send the part number, the belt marking, or a photo of the old belt and the pulley, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 405mm
Frequently asked questions
- What does the 405 5MHP 25 code identify?
- It identifies an Optibelt Omega HP timing belt with an HTD 5M profile, a 405 mm length and a 5 mm pitch. The belt is built for drives that use matching HTD 5M pulleys.
- How do I confirm this belt fits my drive?
- Check the marking on your old belt and the pulley grooves. The profile must be HTD 5M, the length must be 405 mm and the pitch must be 5 mm. If those match, the belt is the correct size.
- What should I send to request a quote?
- Send the part number 405 5MHP 25, or the marking from the back of the old belt. A photo of the belt and the pulley also helps us confirm the right belt or suggest an equivalent.