Timing belt Optibelt 400 / H 1970 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 400 / H 1970 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 400 / H 1970 AFX and any equivalents.
The Optibelt 400 / H 1970 AFX is an Alpha Flex timing belt with an H profile and a length of 5003.8 mm. Before you fit it, inspect the drive so the new belt is not damaged by a fault that is still there.
Start with the sheaves. Check the tooth flanks for wear, rounded edges or buildup in the grooves, since a worn pulley profile will not carry the belt correctly even when the belt itself is new. Look for oil, grease or debris on the sheaves and clean the drive area before fitting.
Check alignment and tension next. Misaligned shafts and pulleys pull the belt to one side and wear the edge, and the correct tension for this drive should be set to the machine's own specification. Turn the drive over by hand and watch the belt track through the sheaves.
Then confirm the belt you are replacing. Read the marking on the back of the old belt and compare it with the Optibelt 400 / H 1970 AFX, H profile, 5003.8 mm. Send that marking and the drive details to MR by WhatsApp or email for a quote.
Dimensions
- Profile
- H
- Length
- 5003.8mm
Frequently asked questions
- What are the profile and length of the Optibelt 400 / H 1970 AFX?
- It is an Optibelt Alpha Flex timing belt with an H profile and a length of 5003.8 mm.
- What should I check before fitting this belt?
- Inspect the sheaves for tooth wear, rounded edges and buildup, check shaft and pulley alignment, and clean any oil or debris from the drive. Set tension to the machine specification.
- How do I request a quote for this belt?
- Send the part number 400 / H 1970 AFX, the marking from the back of the old belt and your drive details to MR by WhatsApp or email.