V-belt Optibelt 40 x 6096 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- E
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 x 6096 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 x 6096 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile E with a length of 6096 mm. It is the belt to reach for when you are replacing an existing drive belt and need the same profile and length rather than a redesign.
Matching starts at the old belt itself. Read the marking printed on the back of the belt you are replacing and note the profile and the length exactly as they appear. On this page the profile is E and the length is 6096 mm, so a replacement should carry the same profile and the same length. If the old belt is worn, stretched or the marking is rubbed off, measure what you can and send us the details.
Confirm the drive before you order. Check that the sheave groove the belt runs in is clean and undamaged, that the sheaves are aligned, and that the belt sits correctly in the groove. A belt that has run hot, cracked or flipped is often a sign of a drive problem rather than a belt problem, and it is worth correcting before a new belt goes on.
When you request a quote, send the part number 40 x 6096 Li, or the profile and length from your old belt, along with the quantity you need. If you are working from a marking you cannot read clearly, send a photo of the belt and the drive and our team will help confirm the right belt.
Dimensions
- Section
- E
- Length
- 6096mm
Frequently asked questions
- How do I know this is the right belt for my drive?
- Compare the marking on your old belt with the data here: profile E and length 6096 mm. If both match, this is the same size belt. If the marking is unreadable, send us the belt or a photo and the drive details.
- What should I send to get a quote?
- Send the part number 40 x 6096 Li, or the profile and length from the belt you are replacing, and the quantity you need. A photo of the belt marking helps if the print is worn.
- Should I replace more than one belt at a time?
- On a multi-belt drive, belts wear together. Replacing a single belt on a set that has already run leaves the new belt carrying more than its share, so it is common practice to replace the full set.