Timing belt Optibelt 40 / 14M 9198 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 / 14M 9198 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 / 14M 9198 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 40 / 14M 9198 AFX. It uses the HTD 14M profile with a 14 mm pitch and a length of 9198 mm. Before fitting it, inspect the drive and sheaves so the new belt runs true.
A timing belt change is a good moment to check the drive. Look at the sheave grooves for wear, debris or damage, confirm the sheaves are aligned, and check that the tensioner and any idlers turn freely. Correcting these points before the new belt goes on helps the drive run as intended.
The belt is an HTD 14M profile with a 14 mm pitch and a 9198 mm length. Match those figures to the marking on the belt you are replacing. If the old belt is worn or its marking is unreadable, the drive documentation or the sheave dimensions can confirm the required profile and length.
To request a quote, send the part number 40 / 14M 9198 AFX by WhatsApp or email. If you are unsure whether this is the right belt, include the existing belt marking and details of the drive, and the team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 9198mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear or damage, verify sheave alignment, and check the tensioner and idlers for smooth rotation. Addressing these items before installation helps the new belt seat and run correctly.
- How do I confirm this is the right belt for my drive?
- Compare the profile and length to the marking on the belt being replaced. This belt is HTD 14M with a 14 mm pitch and a 9198 mm length. If the marking is not legible, the drive documentation or sheave dimensions can confirm the requirement.
- What information should I send with my quote request?
- Send the part number 40 / 14M 9198 AFX by WhatsApp or email. If you need help confirming the belt, include the existing belt marking and details of the drive so the team can assist.