Timing belt Optibelt 40 / 14M 8904 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 / 14M 8904 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 / 14M 8904 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt in the HTD 14M profile with a length of 8904 mm. HTD 14M synchronous belts are commonly used on high-torque industrial drives where positive engagement between belt and pulley is required. Confirm fit by matching the profile and length on the belt you are replacing.
The marking on the back of the belt is the starting point for any replacement. Read the profile and the length from the old belt and compare them against the profile and length of this Optibelt 40 / 14M 8904 AFX. The profile is HTD 14M and the length is 8904 mm; the pitch is 14 mm. If those values match the belt on the drive, this is the correct size.
Timing belts in this profile are found on drives where shaft synchronization matters and where a V-belt or serpentine belt would slip. Before ordering, inspect the pulleys for worn teeth, check the belt for cracked teeth or exposed cord, and verify that the drive is aligned and tensioned to the equipment manufacturer's specification. A belt that failed early often points to a pulley, alignment or tension problem rather than the belt itself.
If the marking on the old belt is worn or unreadable, send the drive details instead. We can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 8904mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the profile and length on your existing belt to the HTD 14M profile and 8904 mm length of this Optibelt 40 / 14M 8904 AFX. The pitch is 14 mm. If the old belt is unreadable, send the drive and pulley details and we can help confirm.
- What should I send to request a quote?
- Send the part number, Optibelt 40 / 14M 8904 AFX, along with the quantity you need. If you are unsure of the number, send the marking from the back of the old belt or the drive details, and we can help confirm the right belt or suggest an equivalent.
- What should I check on the drive before installing a new belt?
- Inspect the pulleys for worn or damaged teeth, check the belt for cracked teeth or exposed cord, and verify alignment and tension against the equipment manufacturer's specification.