Timing belt Optibelt 40 / 14M 8050 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 / 14M 8050 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 / 14M 8050 AFX and any equivalents.
The Optibelt 40 / 14M 8050 AFX is an Alpha Flex timing belt with an HTD 14M profile, an 8050 mm length and a 14 mm pitch. This page helps you match it to the belt you are replacing. The part number and the marking on the old belt are the fastest way to confirm the correct item.
Start with the belt on the drive. Read the marking on the back and compare it with 40 / 14M 8050 AFX. The profile must be HTD 14M and the length must be 8050 mm. If the old belt is worn or the marking is unreadable, measure the length and count the teeth rather than guessing from the application alone.
The Alpha Flex series from Optibelt is built for timing belt drives. The 14 mm pitch and 8050 mm length identify the geometry; the 40 / 14M 8050 AFX code confirms the exact item. When you request a quote, send this full part number so we can confirm the right belt for your drive.
For a second opinion, photograph the back of the old belt and note the drive arrangement. If the existing belt shows cracking, missing teeth or exposed cord, replace it before the drive is returned to service. Keep the old belt until the new one is fitted and the drive is checked.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 8050mm
Frequently asked questions
- How do I match the Optibelt 40 / 14M 8050 AFX to my drive?
- Check the marking on the back of the belt you are replacing. It should read 40 / 14M 8050 AFX, with an HTD 14M profile, an 8050 mm length and a 14 mm pitch. If the marking is gone, measure the old belt and send those details with your quote request.
- What should I send for a quote on this timing belt?
- Send the part number 40 / 14M 8050 AFX, the profile HTD 14M, the length 8050 mm and the pitch 14 mm. A photo of the old belt marking helps confirm the match. We reply by WhatsApp or email.
- Can I replace just one belt on a multi-belt drive?
- On drives with more than one belt, replace all belts at the same time so they share the load evenly. Use the same part number, 40 / 14M 8050 AFX, for each position and check the pulleys for wear before fitting.