Timing belt Optibelt 40 / 14M 6902 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 / 14M 6902 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 / 14M 6902 AFX and any equivalents.
The Optibelt 40 / 14M 6902 AFX is an Alpha Flex timing belt with an HTD 14M profile, a 6902 mm length and a 14 mm pitch. Before you fit it, take a few minutes to inspect the drive so the new belt starts on a sound basis. We carry this belt and quote it by part number.
Start with the sheaves. Look for worn or hooked tooth flanks, corrosion in the grooves, and any build-up that would stop the belt seating correctly. Check each sheave for runout and confirm the shafts and bearings turn freely. A sheave that has damaged the old belt will damage the replacement in the same way.
Check alignment and tension next. Misalignment between the two sheaves pulls the belt against the flange and shortens its life, so verify the sheaves line up before the belt goes on. Set tension to the drive manufacturer's specification, then recheck it after the first run-in period.
Then confirm the belt itself. Read the marking on the back and match the part number, profile and length to the belt you are replacing. This belt is HTD 14M with a 14 mm pitch and a 6902 mm length. Send us the part number and we will confirm it or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 6902mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, corrosion and build-up, check sheave runout and bearing condition, verify alignment between the sheaves, and confirm the tension setting before and after run-in.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt and compare the part number, profile and length. This belt is Optibelt 40 / 14M 6902 AFX, HTD 14M profile, 6902 mm length, 14 mm pitch.
- How do I request a quote?
- Send the part number 40 / 14M 6902 AFX by WhatsApp or email. We reply promptly and can help confirm the right belt or suggest an equivalent.