Timing belt Optibelt 40 / 14M 5096 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 / 14M 5096 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 / 14M 5096 AFX and any equivalents.
The Optibelt 40 / 14M 5096 AFX is an HTD 14M timing belt with a 5096 mm length. When replacing a belt, match the profile and length on the belt you are removing. This page helps you confirm the match before you request a quote.
To match this belt to the one being replaced, read the marking on the back of the old belt. The profile is HTD 14M and the length is 5096 mm. The part number 40 / 14M 5096 AFX combines the profile and length, so it should correspond to the belt you are replacing. If the old belt is worn or the marking is unreadable, measure the length and check the tooth profile before ordering.
This belt is a timing belt, also called a synchronous belt. It has a 14 mm pitch and an HTD 14M profile. The 5096 mm length is the datum length. Use these values to compare with the belt on your drive. If the profile and length match, the belt is the correct replacement.
Send us the part number 40 / 14M 5096 AFX for a quote. If you are unsure, send photos of the old belt and the drive, or the machine make and model. We will confirm the profile and length and suggest an equivalent if needed.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 5096mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt. The profile should be HTD 14M and the length should be 5096 mm. The part number 40 / 14M 5096 AFX should also match. If the old belt is unreadable, measure the length and count the teeth to confirm the pitch.
- What is the pitch of this belt?
- The pitch is 14 mm. This is the distance between the centers of two adjacent teeth.
- What information should I send for a quote?
- Send the part number 40 / 14M 5096 AFX. If you are not sure, send photos of the old belt and the drive, or the machine make and model. We will confirm the profile and length.