Timing belt Optibelt 40 / 14M 4606 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 / 14M 4606 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 / 14M 4606 AFX and any equivalents.
The Optibelt 40 / 14M 4606 AFX is an Alpha Flex timing belt in the HTD 14M profile, with a 4606 mm length and a 14 mm pitch. Before this belt goes onto the drive, the sheaves and the rest of the assembly are worth a look. A new belt on worn or misaligned components will not run the way it should.
Start with the sheaves. Check the grooves for wear, corrosion or buildup, since a profile that no longer matches the belt will affect how it seats and tracks. Confirm the sheaves are aligned with each other and that the shafts and bearings turn freely. Any runout or play at the sheave should be corrected before the belt is fitted.
Then look at the belt that came off. Read the marking on the back and compare it with the profile and length on this page, and check the failed belt for uneven wear, edge damage or cracking that points to a drive problem rather than normal service. If the drive runs more than one belt, replace the set together so the load stays even.
For a quote on the Optibelt 40 / 14M 4606 AFX, send the part number by WhatsApp or email. If you are working from an old belt, the marking on the back plus a photo is usually enough for our team to confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 4606mm
Frequently asked questions
- What are the profile and length of this belt?
- It is an HTD 14M profile timing belt with a 4606 mm length and a 14 mm pitch, part number 40 / 14M 4606 AFX from the Optibelt Alpha Flex series.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear or buildup, confirm sheave alignment, and check that shafts and bearings turn freely. Correcting these points first helps the new belt seat and track properly.
- How do I request a quote?
- Send the part number 40 / 14M 4606 AFX by WhatsApp or email. If you only have the old belt, include the marking from the back and a photo, and our team will confirm the right belt or suggest an equivalent.