Timing belt Optibelt 40 / 14M 1750 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 / 14M 1750 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 / 14M 1750 AFX and any equivalents.
The Optibelt 40 / 14M 1750 AFX is an Alpha Flex timing belt with an HTD 14M profile and a 1750 mm length. Before you fit a new synchronous belt, inspect the drive and the sheaves so the replacement goes on correctly and runs as intended.
Start with the sheaves. Check the grooves for wear, corrosion, nicks or embedded debris, since any of these can damage a new belt. Confirm the sheaves are aligned and that the bearings turn freely. Look over the tensioner and idler as well, and replace any component that is rough, loose or worn.
Then check the belt path and the old belt. Note the profile and length from the back of the old belt, and compare them with the Optibelt 40 / 14M 1750 AFX: HTD 14M profile, 1750 mm length, 14 mm pitch. Clean the drive area before installation, and keep the new belt free of oil, grease and dirt.
If you are working from the marking on the back of the belt, send us the part number, the profile and the length in millimeters. We carry the Optibelt 40 / 14M 1750 AFX and can confirm it for your drive or suggest an equivalent. Request a quote by WhatsApp or email and we will reply promptly.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1750mm
Frequently asked questions
- What are the profile and length of this Optibelt belt?
- The Optibelt 40 / 14M 1750 AFX has an HTD 14M profile and a 1750 mm length, with a 14 mm pitch.
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for groove wear, corrosion, nicks and debris, verify alignment, and check the bearings, tensioner and idler. Replace any worn component before installing the new belt.
- How do I request a quote for this belt?
- Send the part number, the profile and the length in millimeters by WhatsApp or email. We will confirm the Optibelt 40 / 14M 1750 AFX for your drive or suggest an equivalent, and reply promptly.