Timing belt Optibelt 40 / 14M 11900 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 40 / 14M 11900 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 40 / 14M 11900 AFX and any equivalents.
The Optibelt 40 / 14M 11900 AFX is a timing belt in the Alpha Flex series with an HTD 14M profile and a 11900 mm length. When you need to identify or replace this belt, the marking on the back of the old belt is the most reliable starting point.
Read the existing belt's back marking before you order. Look for the part number, profile and length; the 40 / 14M 11900 AFX marking tells you this is an HTD 14M profile belt with a 11900 mm length. If the old belt is worn or the print is gone, measure the length and confirm the profile from the drive components.
This Optibelt Alpha Flex timing belt is built for synchronous drives where the belt teeth mesh with pulleys to maintain timing. The HTD 14M profile is a curvilinear tooth form, and the 14 mm pitch is the distance between tooth centers. The 11900 mm length is the belt's datum length as given by the manufacturer.
When requesting a quote, send the complete part number 40 / 14M 11900 AFX, the profile HTD 14M, and the length 11900 mm. If the marking is unclear, include photos of the old belt and the drive pulleys so we can help confirm the correct belt. We carry Optibelt belts and can assist with matching the right replacement.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 11900mm
Frequently asked questions
- What does the marking on the back of the belt tell me?
- The back marking typically includes the part number, profile and length. For this belt, the marking 40 / 14M 11900 AFX identifies an HTD 14M profile and a 11900 mm length. Use that marking as your primary reference when ordering a replacement.
- How do I confirm the profile and length if the marking is worn off?
- Measure the belt's length and check the pulley tooth profile. The profile is HTD 14M with a 14 mm pitch, and the length is 11900 mm. If you are unsure, send photos of the old belt and the drive pulleys when you request a quote.
- What information should I include when requesting a quote?
- Provide the full part number 40 / 14M 11900 AFX, along with the profile HTD 14M and the length 11900 mm. If you have the old belt, include its back marking or photos to help us confirm the correct replacement.