Poly-V belt Optibelt 4 EPJ 246 CO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- Conveyor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 4 EPJ 246 CO belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 4 EPJ 246 CO and any equivalents.
This Optibelt 4 EPJ 246 CO is a Poly-V (multi-rib) belt with an EPJ profile and a 246 mm length. It is used in conveyor drives and other compact power transmission setups. The part number on the belt is the fastest way to match it to the one you are replacing.
Start by reading the marking on the back of the old belt. Confirm the profile is EPJ and the length is 246 mm, then check the number of ribs against your pulley grooves. The 4 EPJ 246 CO designation covers profile, rib count and length, so a direct comparison is straightforward when the old belt is still legible.
If the marking has worn off, measure the rib count and the length along the belt. A belt that is too short or too long will not sit correctly in the grooves, and the wrong profile will wear quickly. Compare the old belt side by side with the replacement before installation, and inspect the pulleys for wear or debris at the same time.
Send the part number 4 EPJ 246 CO by WhatsApp or email to request a quote. If you are unsure about the profile or length, include the old belt marking and a photo of the drive. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- EPJ
- Length
- 246mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt for the EPJ profile and 246 mm length, and count the ribs to match the 4-rib construction. If the marking is unreadable, measure the length and rib count and compare with the drive pulleys.
- Can I replace just one belt in a multi-belt drive?
- On drives with more than one belt, replacing all belts at the same time helps keep tension even across the set. If you are replacing a single belt, match the profile, rib count and length exactly.
- What information should I send with my quote request?
- Send the part number 4 EPJ 246 CO and the quantity you need. If you are unsure of the part number, include the marking from the old belt and a photo of the drive so the team can confirm the correct belt.