V-belt Optibelt 4-C 6000
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 4-C 6000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 4-C 6000 and any equivalents.
This Optibelt 4-C 6000 is a banded V-belt from the KB VB series, built with a C profile and a 6000 mm length. It is designed for drives where multiple V-belts run together and need to stay aligned under load.
The 4-C designation indicates a C profile with four ribs joined into a single band. The 6000 mm length gives you the exact outside circumference to match your drive. When you read the marking on the back of an old belt, confirm both the profile and the length before ordering.
Banded construction keeps the ribs from turning over or jumping out of the pulley grooves, which is common on drives with pulsating loads or long center distances. If you are replacing a set, order the same number of belts and replace them all at once to keep tension even across the grooves.
To request a quote, send the part number 4-C 6000, the quantity, and a photo of the old belt marking if you have one. Our team can confirm the profile and length or suggest an equivalent if your original belt is no longer readable.
Dimensions
- Length
- 6000mm
Frequently asked questions
- What does the 4-C 6000 part number tell me?
- It identifies a banded V-belt with a C profile, four ribs, and a 6000 mm length. Use these three details to match your drive.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for the profile and length. If it reads C profile and 6000 mm, this belt matches. If you are unsure, send us a photo of the marking.
- Can I replace just one belt in a banded set?
- Banded belts are made as a single unit, so you replace the whole band. If your drive uses multiple separate belts, replace them as a set to maintain even tension.