V-belt Optibelt 4-A 2000

OPTIBELT 4-A 2000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 4-A 2000 and any equivalents.

When you need to replace a banded V-belt, the marking on the old belt is your most reliable reference. This page covers the Optibelt 4-A 2000 from the KB VB series, a banded V-belt with a length of 2000 mm. Use the part number and length to confirm you are specifying the same belt.

The marking on the back of a banded V-belt typically shows the part number and length. For this Optibelt belt, that marking reads 4-A 2000, and the length is 2000 mm. The KB VB series indicates a banded construction, where multiple V-belts are joined by a top band to run as a set on multi-groove drives. This helps maintain constant spacing between the individual belts and reduces the risk of mismatched lengths.

Before you order, read the old belt carefully. Confirm that the part number is 4-A 2000 and that the length matches 2000 mm. If the marking is worn or unreadable, measure the outside length of the belt and note the number of ribs or grooves in the drive. For a quote, send the part number 4-A 2000, the length 2000 mm, and the quantity you need. If you have a photo of the old belt marking, include it with your request.