V-belt Optibelt 3VX 670 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3VX 670 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3VX 670 XEP and any equivalents.
The Optibelt 3VX 670 XEP is a cogged narrow V-belt in the Super XE-Power Pro M=S series. Its 3VX profile and 1702 mm length are the two figures to check first when you are matching a belt to a drive or replacing one already in service.
The 3VX profile identifies this as a narrow V-belt, often called a wedge belt, in a cogged construction. Cogged narrow V-belts are commonly chosen where a standard wrapped belt runs hot or slips on small-diameter pulleys. The 1702 mm length is the datum to compare against the belt you are removing.
The marking on the back of the belt is the most reliable reference. Read the profile and length from the old belt, or measure the drive if the marking is worn away, then quote those figures when you request a quote. If the number on the belt is unclear, send a photo of the marking and the pulley arrangement.
For drives running more than one belt, replace the full set at the same time so the belts share load evenly. Inspect the pulleys for wear, alignment and buildup while the drive is open, and check the tension after the first run-in period.
Dimensions
- Section
- 3VX
- Length
- 1702mm
Frequently asked questions
- What do the 3VX profile and 1702 mm length tell me?
- The 3VX profile is a narrow V-belt cross-section in a cogged construction, and 1702 mm is the belt length. Both figures must match the drive before you order.
- How do I confirm this is the right belt?
- Read the marking on the back of the belt you are replacing. If the profile and length match 3VX and 1702 mm, this is the belt to quote.
- What should I send for a quote?
- Send the part number 3VX 670 XEP, the quantity, and a photo of the old belt marking or the drive if anything is unclear. We reply by WhatsApp or email.