V-belt Optibelt 3V KB 560
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB SK
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3V KB 560 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V KB 560 and any equivalents.
The Optibelt 3V KB 560 is a banded V-belt in the KB SK series, with a length of 1422 mm. Banded V-belts are used on drives where multiple V-belts run in parallel and must stay synchronized, such as those on industrial machinery and process equipment. This page covers how to confirm the fit for your drive.
To confirm this belt fits, check the drive's existing belt marking. The 3V KB 560 designation and the 1422 mm length should match what is on the old belt or in the equipment manual. Because banded belts tie several V-belts together with a common backing, the number of ribs and the overall length are critical. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1422 mm.
When replacing a banded V-belt, inspect the sheaves for wear, alignment, and debris. Worn grooves can cause the new belt to seat improperly and lead to premature failure. Also check that all ribs are present and that the belt is not twisted during installation. For drives with multiple banded belts, replace all belts at the same time to maintain uniform tension and load sharing.
Dimensions
- Length
- 1422mm
Frequently asked questions
- What does the 3V KB 560 part number indicate?
- The 3V KB 560 is the Optibelt part number for this banded V-belt. The profile is 3V, and the length is 1422 mm. The KB SK series indicates the construction style.
- How do I confirm this belt will fit my drive?
- Compare the part number and the 1422 mm length to the marking on your existing belt or the equipment manual. If the marking is not clear, measure the outside length of the old belt and check the number of ribs.
- What should I send to request a quote?
- Send the part number 3V KB 560, the quantity you need, and any details from the old belt such as the length and number of ribs. You can contact us by WhatsApp or email, and we will reply promptly.