V-belt Optibelt 3V 500

OPTIBELT 3V 500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3V 500 and any equivalents.

This Optibelt 3V 500 is a narrow wedge V-belt in the SK S=C Plus series with a 3V profile and a length of 1270 mm. It is used in industrial drives where a compact, high-capacity V-belt is required. To confirm fit, match the 3V profile and the 1270 mm length to the belt you are replacing.

Narrow wedge V-belts like this 3V profile are common on fans, pumps, compressors and other driven equipment where space is limited and the drive runs at higher speeds. The 3V profile is narrower than a classic V-belt, so the sheave groove must be cut for a 3V belt. The 1270 mm length is the datum length to compare against the old belt or the drive specification.

The most reliable way to confirm fit is to read the marking on the back of the belt you are removing. Look for the profile, the length and the part number. If the old belt is worn or the marking is unreadable, measure the outside length and check the sheave groove width. The same size is also listed under Stark 3V 500, Mitsuboshi 3V 500 and Dayco 3V 500, so you can cross-check those markings as well.

When you request a quote, send the part number 3V 500, the profile 3V and the length 1270 mm. If you are replacing a set, send the quantity and the drive details so we can help confirm the right belt or suggest an equivalent.