Timing belt Optibelt 3MHP 312
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3MHP 312 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3MHP 312 and any equivalents.
The Optibelt 3MHP 312 is a timing belt in the Omega HP series. Its profile is HTD 3M, and it measures 312 mm in length with a 3 mm pitch. Use these three values to confirm the belt matches your drive before you request a quote.
The profile and length are the first check when replacing a timing belt. HTD 3M describes the tooth geometry, and 312 mm gives the outside length. The 3 mm pitch is the distance from one tooth center to the next. If your old belt is marked with these values, the 3MHP 312 is the correct size to specify.
When you send a quote request, include the part number 3MHP 312 and the belt marking from your drive. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to confirm the profile and pitch. Our team can help you match the belt to the pulley grooves and confirm the replacement.
Timing belts are often replaced as part of a drive service. Inspect the pulleys for wear or debris, check the tensioner, and replace the belt before it fails. The Optibelt 3MHP 312 is a direct replacement for drives that use an HTD 3M profile, 312 mm length, and 3 mm pitch.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 312mm
Frequently asked questions
- What does the 3MHP 312 part number tell me?
- The 3MHP 312 is an Optibelt Omega HP timing belt. The 3MHP 312 indicates the profile and length: HTD 3M profile, 312 mm length, and 3 mm pitch. Always confirm these values against your drive before ordering.
- How do I confirm this belt fits my drive?
- Check the marking on your old belt. If it shows HTD 3M and 312 mm, the 3MHP 312 is the correct size. You can also measure the belt length and pitch to confirm. If you are unsure, send us the belt marking and photos of the pulleys.
- What should I send to request a quote?
- Send the part number 3MHP 312, the quantity you need, and any details from the old belt. If you have the belt marking or a photo, include it so we can confirm the profile and length before quoting.