Timing belt Optibelt 3MHP 204

OPTIBELT 3MHP 204 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3MHP 204 and any equivalents.

The Optibelt 3MHP 204 is a timing belt from the Omega HP series with an HTD 3M profile and a 204 mm length on a 3 mm pitch. This synchronous belt is used where compact drives need positive, non-slip power transmission, such as small pumps, positioning axes, and light-duty conveying equipment. Confirm fit by matching the profile, length, and pitch on your existing belt to the values listed here.

Because timing belts are selected by profile and length rather than by outside dimensions, the HTD 3M profile and 204 mm length are the key figures to verify. Compare them against the marking on the back of the belt you are replacing, and check that the drive's pulleys are made for the same profile. If the old belt is worn or the marking is unreadable, measure the length along the belt and confirm the tooth profile before ordering.

Replacing a timing belt is also a good moment to inspect the drive. Look at pulley teeth for wear or debris, check that the pulleys are aligned, and set the correct tension according to the drive's requirements. A belt that has run loose or misaligned can show edge wear or uneven tooth loading, which points to a drive issue rather than a belt problem.

We carry the Optibelt 3MHP 204 for maintenance, engineering, and purchasing teams in the United States, Canada, Mexico, and South America. To request a quote, send the part number 3MHP 204 by WhatsApp or email. If you are unsure whether this is the right belt for your drive, include the belt marking or the profile and length you measured, and the team can help confirm it or suggest an equivalent.