Timing belt Optibelt 3MHP 183
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3MHP 183 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3MHP 183 and any equivalents.
The Optibelt Omega HP 3MHP 183 is an HTD 3M timing belt with a 183 mm length and 3 mm pitch. It is used where a positive, synchronous drive is required and the pulley grooves match the HTD 3M profile.
To confirm fit, check the belt marking on the back of the old belt. The profile must be HTD 3M, and the length must match 183 mm. The 3 mm pitch is the distance from one tooth center to the next, so a belt with a different pitch will not seat correctly in the pulley grooves.
HTD 3M timing belts are common on compact, low-power drives in industrial equipment, office machines and small motion systems. Inspect the pulleys for worn or hooked teeth, and check that the belt runs straight and has correct tension before installing a replacement.
If you are replacing more than one belt on the same drive, order them together so the set wears evenly. Send the part number 3MHP 183 by WhatsApp or email with the quantity you need, and we will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 183mm
Frequently asked questions
- How do I confirm the 3MHP 183 is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. The profile must be HTD 3M and the length must be 183 mm. If the old belt is unmarked, measure the pitch and length or send a photo of the belt and pulley by WhatsApp or email.
- What does the 3 mm pitch mean for fit?
- The 3 mm pitch is the center-to-center distance between adjacent teeth. The pulley grooves must be cut for HTD 3M. A belt with a different pitch will not mesh correctly, even if the length is close.
- What should I send for a quote?
- Send the part number 3MHP 183 and the quantity you need by WhatsApp or email. If you are unsure of the profile or length, include the belt marking or a photo of the drive, and we will help confirm the right belt or suggest an equivalent.