Timing belt Optibelt 3MHP 1044
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3MHP 1044 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3MHP 1044 and any equivalents.
The Optibelt 3MHP 1044 is an Omega HP timing belt with an HTD 3M profile, a 1044 mm length and a 3 mm pitch. When you are replacing a belt, match these three details to the belt in hand before you order.
Start with the marking on the back of the old belt. Confirm it reads 3MHP 1044, then check the profile is HTD 3M and the pitch is 3 mm. The 1044 mm length is the figure to compare against the belt you are removing, not a measurement taken around the outside of the drive.
If the marking is worn off, measure the old belt and count the teeth so the profile and pitch can be confirmed. Send the part number, the profile, the length and the pitch to our team by WhatsApp or email, and we will confirm the Optibelt 3MHP 1044 or suggest an equivalent.
For drives that run more than one belt, replace the full set at the same time so the load stays even. Inspect the pulleys for wear or damage while the belt is off.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 1044mm
Frequently asked questions
- How do I confirm the Optibelt 3MHP 1044 is the right belt?
- Check the marking on the back of the belt for 3MHP 1044, then confirm the profile is HTD 3M, the length is 1044 mm and the pitch is 3 mm. If the marking is unreadable, measure and count teeth on the old belt.
- What do I send to request a quote?
- Send the part number 3MHP 1044, the profile HTD 3M, the length 1044 mm and the pitch 3 mm by WhatsApp or email. If you are unsure of the part number, send the marking from the old belt or its measurements.
- Can you help if the Optibelt 3MHP 1044 is not the exact match?
- Yes. Send the details of the belt being replaced and our team will confirm the Optibelt 3MHP 1044 or suggest an equivalent.