Timing belt Optibelt 3M 738
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 738 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 738 and any equivalents.
This Optibelt 3M 738 belt is an Omega timing belt with an HTD 3M profile. The two numbers a buyer needs to match are the profile and the length: HTD 3M and 738 mm.
The profile sets the tooth shape and the pitch. Here the pitch is 3 mm, so the belt runs on a 3 mm pitch HTD pulley. The length is 738 mm. Confirm both against the old belt or the drive specification before ordering.
We carry the Optibelt 3M 738 as part of the Omega line. If you are replacing a worn belt, read the marking on the back of the belt and compare it with the profile and length above. Send the part number and, if you have it, the belt marking for a quote.
For drives that use more than one belt, inspect all belts on the drive and replace them as a set. Check pulley teeth for wear and make sure the belt is tensioned to the drive manufacturer's specification.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 738mm
Frequently asked questions
- What do I need to match this Optibelt 3M 738 belt?
- Match the profile and the length. This belt is HTD 3M with a 3 mm pitch and a length of 738 mm. The old belt marking or the drive specification will confirm both.
- How do I request a quote for the Optibelt 3M 738?
- Send the part number, 3M 738, by WhatsApp or email. If you can, include the marking on the back of the old belt and the quantity you need.
- Should I replace all belts on the drive at the same time?
- Yes. On drives with more than one belt, replace them as a set so the load is shared evenly. Also inspect the pulleys for tooth wear.