Timing belt Optibelt 3M 462
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 462 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 462 and any equivalents.
This Optibelt Omega timing belt carries the part number 3M 462. It has an HTD 3M profile and a 462 mm length, with a 3 mm pitch. Use these three values to confirm the belt matches your drive before you request a quote.
Timing belts in the HTD 3M range are common on compact, low-power drives where the belt teeth mesh with matching pulleys to keep the shafts synchronized. Typical equipment includes small conveyors, office machines, lab instruments and light packaging units. If your drive uses an HTD 3M pulley, check that the belt length and profile match the original marking.
To confirm fit, read the marking on the back of the old belt. The part number should read 3M 462, and the profile should be HTD 3M. Measure the length only if the marking is worn; the replacement must be 462 mm with a 3 mm pitch. A belt that is too long or too short will not tension correctly, and a different profile will not seat in the pulley grooves.
When you request a quote, send the part number 3M 462, the profile HTD 3M, and the length 462 mm. If you are replacing more than one belt on the same drive, include the quantity and the position of each belt. Our team can confirm the belt against your data and suggest an equivalent if needed.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 462mm
Frequently asked questions
- What does the marking on this belt tell me?
- The back of the belt should show the part number 3M 462. The profile is HTD 3M, the length is 462 mm and the pitch is 3 mm. Use these values to match the belt to your drive.
- How do I confirm this timing belt fits my drive?
- Check that your pulleys are HTD 3M and that the old belt is marked 3M 462 or measures 462 mm in length. The 3 mm pitch must also match the pulley grooves. If you are unsure, send the belt marking and pulley details with your quote request.
- What should I send to request a quote for this belt?
- Send the part number 3M 462, the profile HTD 3M, the length 462 mm and the quantity you need. If you are replacing belts in a set, include the position of each belt on the drive.