Timing belt Optibelt 3M 363
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 363 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 363 and any equivalents.
The Optibelt 3M 363 is an Omega timing belt with an HTD 3M profile, a 363 mm length and a 3 mm pitch. To match it to the belt you are replacing, confirm those same three values on the old belt before you request a quote.
Start with the marking on the back of the belt you are removing. It should show the profile and the length; compare them with HTD 3M and 363 mm. If the old belt is worn or the print is gone, measure the length and check the tooth profile against the pulley grooves, then send us the part number you found.
The 3 mm pitch and HTD 3M profile identify the tooth form, while 363 mm is the belt length. All three must match the drive. A belt with the same length but a different profile will not seat correctly in the pulleys, and a different length will not tension properly.
When you request a quote, send the part number 3M 363, the profile HTD 3M, the length 363 mm and the pitch 3 mm. If you are unsure, send a photo of the old belt marking and the pulley teeth. We carry the Optibelt 3M 363 and can confirm it against your data.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 363mm
Frequently asked questions
- How do I confirm the Optibelt 3M 363 is the right belt for my drive?
- Check the marking on the old belt for the profile and length, or measure the length and compare the tooth profile to the pulleys. The replacement must be HTD 3M profile, 363 mm length and 3 mm pitch.
- What should I send with my quote request?
- Send the part number 3M 363, the profile HTD 3M, the length 363 mm and the pitch 3 mm. A photo of the old belt marking or the pulley teeth helps us confirm the match.
- Can I use a belt with the same length but a different profile?
- No. The profile must match the pulley grooves. An HTD 3M profile is required for this belt, along with the 363 mm length and 3 mm pitch.