Timing belt Optibelt 3M 336
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 336 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 336 and any equivalents.
This Optibelt Omega 3M 336 is a timing belt with an HTD 3M profile and a 336 mm length. It is used in drives where synchronization between the pulley and the belt is required, such as positioning, indexing, and light conveying equipment. Confirm fit by matching the profile and length to your drive.
The HTD 3M profile and 336 mm length are the two dimensions to verify before ordering. Check the old belt's back marking or measure the length along the pitch line. The 3 mm pitch is part of the profile designation and is fixed for this belt.
Timing belts in this size range are common on compact drives where slip must be avoided. Inspect the pulleys for worn teeth, debris, or misalignment, and check the belt for cracked teeth, exposed cords, or glazing. If the drive runs multiple belts, replace them as a set.
To request a quote, send the part number 3M 336, the profile HTD 3M, and the length 336 mm. If you are unsure, send a photo of the belt's back marking and the pulley teeth. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 336mm
Frequently asked questions
- How do I confirm the Optibelt 3M 336 fits my drive?
- Match the profile HTD 3M and the length 336 mm to your current belt or drive specifications. Check the back marking on the old belt and count the pulley teeth to confirm the profile.
- What should I send to get a quote?
- Send the part number 3M 336, the profile HTD 3M, and the length 336 mm. A photo of the belt's back marking and the pulleys also helps us confirm the correct belt.
- Can I replace just one belt on a multi-belt drive?
- On drives with more than one belt, replace all belts as a set so they share the load evenly. Inspect the pulleys for wear or damage at the same time.