Timing belt Optibelt 3M 237
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 237 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 237 and any equivalents.
The Optibelt Omega 3M 237 is a timing belt with an HTD 3M profile, a 237 mm length and a 3 mm pitch. When you pull a worn belt from a drive, the marking on the back is the fastest way to identify what was running there. Match that marking to this part number before you order.
Read the back of the old belt carefully. A marking such as 3M 237 identifies the profile and the length, and the Optibelt name confirms the line. If the printing is worn or rubbed away, measure the belt and note the tooth profile so the replacement can be confirmed against the drive pulleys.
This belt uses the HTD 3M profile with a 3 mm pitch and a 237 mm length. Those three details are what tie the belt to its pulleys, so they should be checked against the old part rather than assumed from the equipment model alone. Where several belts run on one drive, replacing them as a set keeps the load shared evenly.
Send the marking from the old belt, or the part number 3M 237, by WhatsApp or email and the team will confirm the Optibelt Omega belt for your drive. If the marking is unclear, include the profile, length and pitch you measured so the match can be verified.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 237mm
Frequently asked questions
- How do I identify the belt I need to replace?
- Look at the marking printed on the back of the old belt. The part number 3M 237, together with the Optibelt name, identifies this belt. If the marking has worn off, measure the length and check the profile and pitch against the pulleys.
- What profile and length does this belt have?
- It is an HTD 3M profile timing belt with a 237 mm length and a 3 mm pitch.
- What should I send to request a quote?
- Send the part number 3M 237, or the full marking from the old belt, by WhatsApp or email. If the marking is not readable, include the profile, length and pitch you measured and the team will help confirm the right belt.