Timing belt Optibelt 3M 1500 (HTD)
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 1500 (HTD) belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 1500 (HTD) and any equivalents.
The Optibelt Omega 3M 1500 (HTD) is an HTD 3M timing belt with a 1500 mm length and a 3 mm pitch. Before fitting it, inspect the drive so the new belt starts on clean, true running surfaces.
Check the sheaves for worn teeth, burrs, corrosion or debris in the grooves. Any of these can damage a new belt, so correct them first. Confirm the sheaves are aligned and that the bearings turn freely and without play.
Set the correct tension according to your drive, then rotate the drive by hand and watch the belt track. Listen for unusual noise and look for the belt seating properly in the grooves. Recheck alignment and tension after the first run-in period.
When you request a quote, send the part number 3M 1500 (HTD) and confirm the profile HTD 3M, the 1500 mm length and the 3 mm pitch. If you are replacing an existing belt, the marking on the back helps confirm the match.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 1500mm
Frequently asked questions
- What are the profile, length and pitch of this belt?
- It is an HTD 3M profile timing belt with a 1500 mm length and a 3 mm pitch.
- What should I check before fitting it?
- Inspect the sheaves for worn teeth, burrs, corrosion or debris, confirm alignment, and make sure the bearings turn freely and without play.
- How do I request a quote?
- Send the part number 3M 1500 (HTD) by WhatsApp or email, along with the profile, length and pitch if you have them.