Timing belt Optibelt 3M 126 (HTD)
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 126 (HTD) belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 126 (HTD) and any equivalents.
The Optibelt Omega 3M 126 (HTD) is a timing belt with an HTD 3M profile, a 126 mm length and a 3 mm pitch. When you read the marking on the back of the old belt, this is the identification you are looking for. The part number 3M 126 (HTD) tells us the profile and length we need to match.
Start by cleaning the back of the belt and reading the full marking. Look for the profile, the length and the pitch. On this belt those are HTD 3M, 126 mm and 3 mm. If the marking is worn, measure the old belt across its length and note the profile from the pulley grooves. Send us the part number 3M 126 (HTD) along with the profile and length so we can confirm the match.
This is a timing belt, also called a synchronous belt, used where the drive needs to stay in step. The HTD 3M profile and 126 mm length are what define the fit on the pulleys. If you are replacing more than one belt on the same drive, order them together so the set wears evenly. We carry the Optibelt Omega line and can help you confirm the right belt for your application.
For a quote, send the part number 3M 126 (HTD) by WhatsApp or email. Include the profile, the length and the pitch from the old belt marking if you have them. If you are unsure, a photo of the back of the belt and the pulley grooves helps us confirm the correct item.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 126mm
Frequently asked questions
- How do I read the marking on the old belt?
- Clean the back of the belt and look for the printed characters. For this belt you should see the profile HTD 3M, the length 126 mm and the pitch 3 mm. If the marking is unreadable, measure the length and check the pulley profile.
- What does the part number 3M 126 (HTD) tell you?
- It identifies an Optibelt Omega timing belt with an HTD 3M profile, a 126 mm length and a 3 mm pitch. Those are the values we use to confirm the correct belt for your drive.
- What should I send to request a quote?
- Send the part number 3M 126 (HTD) by WhatsApp or email. If you have the old belt, include the profile, length and pitch from the back marking. A photo of the belt and pulleys can help us confirm the match.